All industrial machinery, be it a compressor, an engine or a genset requires effective air, oil and fuel filtration to achieve optimum results. Our filters are specially customized and designed to meet the filtration needs for a large range of industrial machinery.
An Air Cleaner Assembly mainly comprises a housing, a primary filter element and an inner or safety element. It is used for industrial and automotive applications from 80 to 2500 CFM, although Ashra can customize the configuration based on requirements. With an enhanced life, low downtime cost and an efficiency of 99.9%, our filters are used in internal combustion engines, compressors, gensets and automotive applications.
LEARN MORE >>
Our pre-cleaners prevent premature clogging of filters due to contaminants, thus extending the life of your filters. These cost-effective options are available in metal and plastic and are used in compressors and gensets.
LEARN MORE >>
Our panel filters are made with quality material thus facilitating high dust collection. Available in box type and frame type, they are used in compressors, clean room applications and HEPA.
LEARN MORE >>
One of our popular types is the depth filter element often used in heavy fuel oil applications and manufactured using specific blends of media. This provides long service life and high particulate retention and a gradual differential pressure increase during the life of the element.
LEARN MORE >>
Our lube filtration systems keep oil clean and engines running at peak performance by capturing contaminants that can cause engine damage. Our high performance lube oil elements have been developed to provide efficient filtration. These long life disposable filter cartridges are designed for the optimum protection of bearings and gears by removing all contaminants when the cartridges are replaced.
LEARN MORE >>
This style eliminates oil aerosols from compressed streams and is suitable for flow from the outside to the inside. These are manufactured using glass fibre elements with a consistent pore size and can be used for the entire range of current versions of screw-type and sliding vane compressors. The standard wrap elements are insensitive to design variations and achieve optimal results in separation efficiency and service life.
LEARN MORE >>
This style is used when oil flows from the outside to the inside. These filters are manufactured with several grades of glass fibre filter media wrapped around them and can handle more oil aerosol when compared to the wrapped or pleated versions. They occupy less space and are suitable for all versions of screw-type and sliding vane compressors. The main benefit of these filters is increased airflow capacity while maintaining a low initial pressure drop and residual oil content.
LEARN MORE >>
In this style, a filter pleat is added to the media during manufacture. Pleating the filter media increases the media surface. These filters can handle on an average, twice the airflow when compared to a conventional air oil separator, which uses the standard, wrapped method.
LEARN MORE >>
Spin-on filters consist of a head mounted directly in-line with the piping and a cartridge containing a filter element. The cartridge seals to the head to prevent leakage. These filters are an effective and economical choice where line pressure is low, and there are no strong pressure surges. These filters are easy to replace without special equipment or tooling.
LEARN MORE >>
Air Cleaners for Industrial Compressor application, matching OE requirements.
Air Cleaners for Industrial applications, according to OE requirements, matching end-user
Air Cleaners suitable for off-highway Applications for severely dusty environments.
Superior filtration coverage to provide complete protection for mining operations.
LEARN MORE >>